agilent HDSP-H571, hdsp-h573 5 x 7 general purpose dot matrix displays 53.2 mm (2.09 inch) package data sheet description this display comprises 7 rows by 5 columns of 5.0 mm diameter dots on a pitch of 7.62 mm. the device is available in common row cathode features ? 5 x 7 dot matrix C dot diameter 5.0 mm C dot pitch 7.62 mm ? high efficiency red (her) ? black face paint device selection guide description HDSP-H571 common row anode hdsp-h573 common row cathode and common row anode configurations. the displays come in black face paint. each dot has high efficiency red. part numbering system note: 1. for codes not listed in the figure above, please refer to the respective datasheet or contact your nearest agilent representative for details. hdsp - x x x x device configuration/color [1] 1: common row anode 3: common row cathode character height/device configuration [1] 7: 2.0 to 2.99 inch height, common row cathode (for hdsp-sxxx and mxxx series only) package configuration [1] 5: 5 x 7 dot matrix package type/color [1] refer to respective datasheet
2 package dimensions 30.48
(1.200) 45.72
(1.800) row col 1 2 3 4 5 6 7 12345 pin 1 ? 5.00 (0.197) x 35 notes:
1. dimensions in millimeters (inches).
2. unless otherwise stated, tolerance is ?0.25 mm. 2.54
(0.100) part no. 38.10
(1.500) 4.0 ?0.50
(0.157 ?0.020) 53.20
(2.094) 38.40
(1.512) 8.60
(0.339) 0.51
(0.020)
dia. 7.62
(0.300) 7.62
(0.300) HDSP-H571
yww c00 x 15.24
(0.600) coo = country
of origin yww = date code x = intensity bin 0.50
(0.020)
3 internal circuit diagram common row anode 4 9 10 6 345 3 2 13 1 14 8 5 1 7 2 1 2 3 4 5 6 7 11 pin column row 12 pin no. function 1 row 5 anode 2 row 7 anode 3 column 2 cathode 4 column 3 cathode 5 row 4 anode 6 column 5 cathode 7 row 6 anode 8 row 3 anode 9 row 1 anode 10 column 4 cathode 11 column 3 cathode 12 row 4 anode 13 column 1 cathode 14 row 2 anode
4 internal circuit diagram common row cathode 4 9 10 6 345 3 2 13 1 14 8 5 1 7 2 1 2 3 4 5 6 7 11 pin column row 12 pin no. function 1 row 5 cathode 2 row 7 cathode 3 column 2 anode 4 column 3 anode 5 row 4 cathode 6 column 5 anode 7 row 6 cathode 8 row 3 cathode 9 row 1 cathode 10 column 4 anode 11 column 3 anode 12 row 4 cathode 13 column 1 anode 14 row 2 cathode
5 absolute maximum ratings at t a = 25?c high efficiency red parameter symbol (her) units power dissipation per dot p d 60 mw peak forward current per dot i peak 80 ma average forward current per dot i f avg 25 [1] ma reverse voltage per dot v r 5v operating temperature t o C40 to +85 c storage temperature t s C40 to +85 c soldering conditions temperature 260 c (2 mm [0.079 in.] below seating plane) time 3 s note: 1. derate above 50 c at 0.36 ma/ c. optical/electrical characteristics at t a = 25?c parameter symbol min. typ. max. units test conditions forward voltage v f 2.1 2.6 v i f = 20 ma reverse voltage per dot v r 5.0 v i r = 100 m a intensity per dot i v 2.20 3.30 mcd i fp = 40 ma, 1/8 duty peak wavelength l p 632 nm i f = 20 ma dominant wavelength l d 622 nm i f = 20 ma spectral line half wavelength dl 40 nm i f = 20 ma thermal resistance led r q j-pin 320 c/w/dot junction-to-pin notes: 1. the digits are categorized for luminous intensity. the intensity category is designated by a letter on the side of the package. 2. typical specification for reference only. do not exceed absolute maximum ratings. intensity bin limits (i fp = 40 ma at 1/8 duty factor) bin i v , min. (mcd) i v , max. (mcd) g 2.20 3.30 h 3.31 4.97 tolerance of each minimum and maximum = 15%.
contrast enhancement for information on contrast enhancement, please see application note 1015. soldering/cleaning cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroeth- ylene, carbon tetrachloride, etc.) are not recommended for cleaning led parts. all of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic led parts. figure 3. relative luminous intensity vs. dc forward current. figure 1. maximum allowable average current per dot vs. ambient temperature. figure 2. forward current (dc) vs. forward voltage. i f avg. ?maximum average current ?ma 0 0 t a ?ambient temperature ?? 20 80 120 15 60 40 r q j-a = 770?/w 5 10 20 25 30 100 i f ?forward current (dc) per dot ?ma 0.5 0 v f ?forward voltage ?v 100 70 60 30 10 2.0 3.0 80 50 20 1.5 2.5 40 1.0 90 for information on soldering leds, please refer to application note 1027 and application note 1060. device reliability for reliability information, please see the reliability data sheet 5 x 7 bi-color general purpose dot matrix displays. relative luminous intensity
(normalized to 1 at 5 ma) 0 0 i f ?forward current per dot ?ma 12 8 4 20 10 6 2 10 30 51525 6
www.semiconductor.agilent.com data subject to change. copyright ? 2001 agilent technologies, inc. august 27, 2001 5988-1980en
|
